Installing the SIM card, battery, and memory card
Keep all SIM cards out of the reach of small children.
For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider,
network operator, or other vendor.
Use only compatible MultiMediaCards (MMC) with this device. Other memory cards, such as Secure Digital (SD) cards, do not fit
in the MMC card slot and are not compatible with this device. Using an incompatible memory card may damage the memory
card as well as the device, and data stored on the incompatible card may be corrupted.
1. Always switch the device off, and disconnect the charger before removing the battery.
With the back of the device facing you, press the back cover release button (1), and slide the cover in the direction of the
arrows.
2. Insert the SIM card into the SIM card slot (1).
Make sure that the beveled corner of the SIM card is pointing down and the contact area on the card is facing downwards.
Always remove the battery before inserting or removing a SIM card.
If you have a memory card, slide the memory card into the memory card slot (2). Make sure that the beveled corner of the
memory card is pointing towards the SIM card slot and the contact area is facing downwards.
See "Memory
cards" on page 14.
3. Insert the battery. Align the contacts of the battery with the corresponding connectors on the battery compartment.
4. Insert the locking catches of the back cover into the corresponding slots, and slide the cover into place.
Copyright © 2005-2006 Nokia. All Rights Reserved.
8
After the battery is inserted, the communicator interface starts up. It may take some time before the communicator interface
has started and can be used. When you see Desk (the text
Desk
and the date are visible on the display), you can continue.
Tip: If you have inserted the battery, but the communicator interface does not start up, press the power key.