Data mover
You can use
Data mover
to move certain data, such as contacts and settings, from your Nokia 9200 series Communicator to your
Nokia 9300i with infrared or a memory card. Before you start, make sure that there is enough free memory in your devices or
memory card for the move. Note that if there is less than 2 MB of free memory in the Nokia 9300i , you cannot move any data.
Do not use the Nokia 9300i when using Data mover. If possible, switch off the cover phone. Make sure you have enough battery
power, or connect the device to a charger.
Note: Before you use an existing compatible memory card with your Nokia 9300i, you must convert the memory card
with Data mover and reinstall the applications that you previously installed to the memory card. However, do not
reinstall any pre-installed applications for the Nokia 9210 Communicator. Your Nokia 9300i contains a later version of
these applications, and these later versions must be used with Nokia 9300i.
There may be additional steps, depending on the type of data that you want to move, the method you want to use to move the
data, the amount of free memory on your devices or memory card, or the number of successful or unsuccessful data moves you
have made previously. Make sure that the infrared ports of the devices are facing each other.
Always read the instructions that Data mover provides on the display.
1. Go to
Desk
>
Tools
>
Data mover
. If there is data on a memory card, insert it to your Nokia 9200 series Communicator. Press
Continue transfer
.
2. Select your current city and country, and press
OK
.
3. Activate infrared in both devices, make sure that the infrared ports of the devices are facing each other, and press
Continue
. An infrared connection is established between the devices.
4. Press
Send data collector
to send Data collector to your Nokia 9200 series Communicator. Data collector is sent as an infrared
message to the Inbox in your Nokia 9200 series Communicator. To install Data collector, press
Open
in the 9200 series
Communicator. If
Open
is not available, press
Save
to save the installation file, and open it from File manager. Data collector
starts automatically after installation. Control the rest of the data move process with the Nokia 9300i. After Data collector is
installed,, press
Connect data coll.
in the Nokia 9300i.
5. In the Nokia 9300i, select the data you want to move from your Nokia 9200 series Communicator. You can move calendar
and contact information, messages, settings, documents, and images. Some files, such as business card messages and e-mail
messages not stored in the Inbox, are not moved.
6. Press
Transfer infrared
or
Transfer mem. card
, depending on the method you want to use.
7. Press
Start transfer
. If the process is interrupted, restart Data mover, and continue with the move. If the problem happens
again, there may be a problem with the data you are trying to move. Start the data move process again, but do not select
the data that seems to cause the problem.
8. Press
OK
after the transfer to finish the data move process.
9. Press
Exit
to close Data mover, or
Convert mem. card
to convert a memory card for use in your Nokia 9300i.
Moving large amounts of data from your Nokia 9200 series Communicator may take some time.