Modifying the EAP-TLS settings
To modify the EAP-TLS settings for an Internet access point, select
Connections
>
Internet setup
. Select a wireless LAN Internet
access point from the list, and press
Edit
>
Advanced
. Select the
EAP
page. Select EAP-TLS from the list, and press
Configure
.
• On the
User certificates
page, select which personal certificates are used for user authentication when using this Internet
access point. This page shows all the installed personal certificates on the device. The certificates are enabled by default. To
disable a certificate, select the certificate, and press
Disable
.
• On the
CA certificates
page, select which authority certificates are valid for server verification in wireless LAN authentication
when using this Internet access point. This page shows all the installed authority certificates on the device. All certificates
are enabled by default. To disable a certificate, select the certificate, and press
Disable
.
• On the
Cipher suites
page, select which TLS (transport layer security) cipher suites you want to use with this Internet access
point. To enable a selected cipher suite, press
Enable
.
• On the
Settings
page, you can define additional settings related to EAP-TLS. For instructions on modifying these settings, see
the Help function in the device.